Best Replica TAG Heuer CONNECTED PREMIER LEAGUE EDITION SAR8A80.BF0605 watch

tag heuer carrera calibre 36 replica

Best Replica TAG Heuer CONNECTED PREMIER LEAGUE EDITION SAR8A80.BF0605 watch

Case Material: Stainless steel
Brand Name: TAG Heuer Watches
Water Resistance Depth: life proof water
Movement: Quartz
Dial Diameter: 46.20mm
Clasp Type: Deployment Buckle
GLASS: Sapphire
Boxes: common box package
Gender: male
Band Material Type: Stainless steel
Case Thickness: 12.80mm
Model Number: SAR8A80.BF0605
FUNCTIONS: Hours, Minutes, Seconds, Day, Stopwatch, Chronograph

breitling navitimer replica After more than 24 hours, the clockwork torque will drop sharply and the travel time error will increase. In order to ensure that the watch is more accurate, it is necessary to fill the clock every day. To understand the principle of automatic mechanical watch, it is necessary to understand its automatic mechanism.

The clockwork is the most important part of the watch movement's original motion system. The original motion system includes: the barrel, the barrel cover, the shaft and the spring. Unlike the clockwork structure of the general hand-wound watch, the spring of the automatic watch does not have a "tail hook", so it is not hung on the inner wall of the barrel. In fact, it has a "secondary spring" at the end of the spring, which is connected to the entire spring by current spot welding. In the free state, the spring is S-shaped, and the direction of the "secondary spring" is opposite to that of the spring, so it has a reverse force. The width of the "secondary spring" is slightly narrower than that of the spring, but the thickness is relatively large, about 1.5 times that of the spring, and the length is almost close to the inner disk of the barrel.When the spring is inserted into the barrel, the "secondary spring" creates a frictional friction on the inner wall of the barrel. When the watch spring is fully tightened, the "secondary spring" and the inner wall of the barrel are produced. Slip. Therefore, the automatic watch spring has two torque indicators, one is the full-string torque and the other is the spring-slip torque. The clockwork slip torque must be greater than the full string torque to ensure that the automatic spring can be full. The size of the spring slip is very important and must be appropriate. If it is too large, it will cause the watch to swing. richard mille rm11-03


The so-called “swing” means that the balance swings too far and left, causing the impact of the balance to collide. The phenomenon of the outside of the fork of the pallet fork), serious damage to the self-winding gear. If the slipping torque is too small, the length of the watch will not be enough, which may cause the stoppage.There are two friction-disengagement mechanisms in the watch that are elastically matched: one is on the minute wheel, which solves the different needs of the needle and the needle when the watch is taken; the other is the automatic spring. Therefore, if the automatic watch is wound up by hand, it will always be "upper". Once the winding torque is greater than the spring slip torque, the "secondary spring" will slip off the wall of the box. "The refueling is very particular. It is usually made of viscous paste oil or black molybdenum disulfide. The amount of oil should be strictly controlled. Moreover, even when cleaning a good watch, the barrel is also Should not be opened.

(In addition to the fault of the hairline), there are many imported watches with a self-lubricating mark on the barrel wheel or simply made nondetachable, that is, you are not allowed to open. The “secondary spring” slip torque has a relatively large influence on the torque output of the watch's train wheel. It directly affects the swing height. In order to stabilize the slip torque, many watches also make grooves on the inner wall of the barrel.In theory, the automatic watch should compare the accuracy of the hand string. That is because the clockwork of the watch should be full if it is worn, but the premise is that the amount of movement of the person should be sufficient. Therefore, the elderly, the sick, and the people who sit and work all the year round are not suitable for wearing automatic watches. Insufficient amount of exercise can only be supplemented by hand winding, but if a watch marked "AUTOMATIC" is wound up by hand, it is indeed a rather frustrating thing.hyt skull watch replica


It is a common occurrence of a watch failure. When a watch fails, how should the watch malfunction occur? How should it be judged and repaired? When the watch moves weakly, the watch may stop when the balance wheel stops. The watch's spring torque is not electric or the spring is deformed, and the strip cover is out of the box, the teeth are bent or the small round rod of the upper shaft is too long.Scraper box wheel; the strip wheel wall is broken or deformed t-spring is too wide, so that the strip box is convex.After the watch is screwed on the back cover, the watch will not go. What is the fault? After tightening the back cover, the Armani watch will not go.After the movement of the movement, the elbow is normal. The faulty part may be: the second hand is too high to touch the watch glass, and the watch glass is not tightly closed, causing the second hand to touch the watch glass. The solid machine ring is too high or too low, causing the brake ring to be pressed. Watch movementOr the back cover presses the movement of the watch, affecting the axial clearance and not rotating.aaa replica watches

Weitere Artikel der Kategorie Allgemein

• Kleinhirninfarkt- Drehschwindel und extremes Erbrechen
• leichter schlaganfall warum nimmt mann uns nicht ernst
• Medikamente nach Schlaganfall.....was ist richtig??
• Kleinhirninfarkt
• Fliegen nach SA